To help LED lighting devices operate reliably over time, proper heat sinks must be installed for both LEDs (including monolithic LED drive energy built-in circuitry) and MOSFET energy changes in high-energy LEDs. waterproof electronic led driver ，Over time, the push force supply is able to dissipate the high temperature generated inside the notch. To prevent the notch temperature from exceeding the maximum junction temperature due to very poor heat dissipation, strength quotes often do not work properly, or notch issues may occur.

The loss of the ability of a monolithic guided driver mainly involves a reduction in conduction and a reduction in conversion.

On-state damage is a result of the on-resistance Rs(ON) of the MOSFET. The smaller the on-resistance, the lower the on-resistance damage. Switching losses refer to MOSFET losses due to depletion capacitance CÏ….

Typically, the turn-on level of resistive losses is much greater than switching losses, and switching defects can even be ignored. It should be pointed out that when determining the energy factor of the monolithic IFD driving the vehicle strength including the circuit, only the attenuation of the unit itself needs to be considered.

like：

The importance of LED drivers to LEDs

Everyday Measures for Directed Power Source

What are the main attributes of the LED power driver

Posted by: fjiefsie at 08:39 AM | No Comments | Add Comment
Post contains 218 words, total size 2 kb.