1. Try to use the LED type in range, for the reason that voltage distinction of the Guided floodlight is specific. landscape led flood lights . The maximum current of everyday Guided is taken care of at 80mA, and also the turn back voltage is approximately 6V. When designing LEDs, you want to pay attention to top voltage and current when designing your circuit.

2. Work with a voltage below 25 watts when soldering, and the temperatures of the soldering iron must be controlled below 300 qualifications Celsius. As soon as the SMD LED is open to substantial temperatures, usually do not squash its epoxy resin portion, and never clean it by using a razor-sharp difficult subject, because the Directed gentle is quite fragile. Indeed, very easily damaged, lower than 3 seconds to solder.

Directed floodlights are widely used, so installment expertise and safety measures are essential. Guided is really a new type of light source. Under the correct installing approach, the Directed floodlight could be guaranteed to work stably and normally for some time.

like：

Floodlight set up precautions

Posted by: fjiefsie at 06:34 AM | No Comments | Add Comment
Post contains 203 words, total size 2 kb.